Fino a 6 microfoni/12 ingressi di linea (4 mono 4 stereo)
Bus 2 gruppi 1 bus stereo
2 AUX (inclusi FX)
Altoparlante "D-PRE", con un circuito a transistor inverso
Compressore a manopola singola
Effetti avanzati: SPX, con 24 set di effetti preimpostati
Funzione audio USB a 24 bit / 192kHz 2 in / out
Connetti all'ipad (2 o superiore) tramite il Kit di connessione per fotocamera Apple iPad/adattatore per fotocamera da Lightning a USB♦Include il software di download Cubase Al DAW
Interruttore PAD su canale di ingresso mono
Alimentatore phantom 48V
Uscita bilanciata XLR
L'alimentatore interno del mondo
Il kit di montaggio dell'armadio opzionale RK-MG12 è disponibile per la vendita
Corpo in metallo
Model | MG20XU/MG20 | MG16XU/MG16 | MG12XU/MG12 | |||||
Frequency response | Enter to STEREO OUT | +0.5dB/-1.5dB (20Hz to 48kHz), Reference rated output level @ 1kHz, GAIN knob: Min | ||||||
Total harmonic distortion(THD+N) | Enter to STEREO OUT | 0.03 % @ +14dBu (20Hto20kHz), GAIN knob: minimum 0.005% @ + 24dBu (1kHz), GAIN knob: minimum | ||||||
Hum and noise*1 (20Hzto20kHz) | Same input noise | -128dBu(Mono input channel, Rs: 150Ω, GAIN knob: max) | ||||||
Residual output noise | -102dBu(STEREO OUT, STEREO Main fader: minimum) | |||||||
Crosstalk(1kHz) *2 | -78dB | |||||||
Input channel | Mono | 12 | 8 | 4 | ||||
Mono/Stereo [MIC/LINE] | 4 | 2 | 2 | |||||
Stereo [LINE] | 0 | 2 | 2 | |||||
Input channel | STEREO OUT | 2 | ||||||
MONITOR OUT | 1 | |||||||
PHONES | 1 | |||||||
Channel Gain | 4 | 4 | 2 | |||||
3-band EQ | 4 | 4 | 2 | |||||
Bus bar | stereo: 1, Grouping: 4, AUX: 4(MG20XU: include FX> | stereo: 1, Grouping: 4, AUX: 4(MG16XU: in | stereo: 1, Grouping: 2, AUX: 2(MG12XU: include FX) | |||||
Input channel function | PAD (Mono) | 26dB | ||||||
HPF (Mono, Mono/Stereo) | 80Hz, 12dB / octave (Mono / Stereo: MIC only) | |||||||
COMP (Mono) | Single-knob compressor (gain / threshold / ratio) threshold: +22 dBu to -8dBu, ratio: 1: 1 to 4: 1, output level: 0dB to 7dB attack time: about 25msec, release time: about 300msec | |||||||
EQ | HIGH: Gain: + 15dB / -15dB, Frequency: 10 kHz Slope | |||||||
MID: Gain: + 15dB / -15dB, Frequency: Mono 250Hz - 5kHz peak Stereo 2.5 kHz peak | MID: gain: + 15dB / -15dB, frequency: 2.5kHz peak | |||||||
LOW: Gain: + 15dB / -15dB, frequency: 100Hz slope | ||||||||
PEAK LED (Mono) | The LED lights up when the post EQ signal reaches 3dB below the frame distortion | |||||||
Level meter | Before listening LEVEL | 2x12 - dot pitch LED level meter [PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30dB] | ||||||
Built-in digital effects (XU model) | SPX algorithm | 24 programming, PARAMETER controller: 1, FOOT SW: 1 (FX RTN CH on / off) | ||||||
USB audio (XU model) | 2 IN /2 0UT | USB Audio 2.0 compatible Sampling rate: maximum 192kHz, Bit depth: 24-bit | ||||||
Phantom power supply voltage | +48V | |||||||
Power requirements | AC100-240V, 50/60Hz | |||||||
Power consumption | 36W | 30W | 22W | |||||
physical dimension(W x H x D) | 444mm x 130mm x 500mm (17.5"x 5.1"x 19.7") | 444mm x 130mm x 500mm (17.5"x 5.1"x 19.7") | 308mm x 118mm x 422mm (9.6"x2.8"x11.6") | |||||
net weight | MG20XU:7.1kg (15.7 lbs.) MG20:6.9kg (15.2 lbs.) | MG16XU:6.8kg (15.0 lbs.) MG16:6.6kg (14.6 lbs.) | MG12XU:4.2kg (9.3 lbs.) MG12:4.0kg(8.8 lbs.) | |||||
Include attachments | Technical specifications, AC power cord, Cubase AI Download information (XU Models) Cabinet mounting kit (MG20XU, MG20, MG16XU, MG16) | |||||||
Optional accessories | Cabinet mounting kit: RK-MG12 (for MG12XU, MG12 use), pedal switch: FC5 (XU model) | |||||||
Operating temperature | 0 to +40℃ |
Questo sito è protetto da DSPPA audiovial e si applica anche a web browsers'Politica sulla PrivacyETermini di utilizzo.